Enable old discovery method: Needed on some scenarios like no mesh support (fw Filters -> Parental Controls -> Device Block.Consider home: Number of seconds that must elapse before considering a disconnected device “not at home”.Select the AVM FRITZ!Box Tools integration, then select Configure. To change the settings, go to Settings > Devices & Services. It is possible to change some behaviors through the integration options. If no password is given, it will be auto-generated. The password must be between 8 and 63 characters long. Remove all stale devices from Home Assistant.Ī device is identified as stale when it’s still present on Home Assistant but not on the FRITZ!Box. ServicesĬurrently supported services are Platform specific:

Prior to FRITZ!OS 7.24 the default username was admin. Under properties on the right it says created automatically. The username starts with fritz followed by four random numbers. This can be found after logging into the FRITZ!Box and visiting System -> FRITZ!Box Users -> Users. Starting from FRITZ!OS 7.24 the FRITZ!Box creates a random username for the admin user if you didn’t set one yourself. The configuration in the UI asks for a username. Both TR-064 and UPnP need to be enabled in the FRITZ!Box ( Home Network -> Network -> Network settings -> Access Settings in the Home Network ) for Home Assistant to login and read device info.